User Manual
Table Of Contents
- Introduction
- Table of Contents
- Quick Setup
- Parts and Controls
- Guide to the Main Menu
- Basic Handset Operations
- Using the Camera
- Entering Text
- Using the Contacts List
- Using the Message Service
- Downloading and Other Features
- Using the Personal Organiser
- Using the Call History
- Setting the Handset
- Connecting to a PC
- Troubleshooting
3-15
Quick Setup
Battery Status
Check the battery indicator displayed in the upper left of
the display to estimate remaining battery power. When
the battery is empty, “ ” appears on the display and
an alarm sounds. The battery may only last for another 5
minutes. If you are using your handset, charge the battery
immediately.
Step 4:
Turning Your Handset On
Press F and hold for approximately 2 seconds.
The standby screen appears.
Turning Your Handset Off
Press F and hold for approximately 2 seconds.
Step 5:
Setting the Date and Time
Set the date and time before using the handset. If date
and time are left unset, you cannot operate some time-
based functions correctly.
1 Slide open the handset.
2 Press B.
The main menu appears.
Battery Indicators Charge Level
Sufficiently charged
Partially charged
Charging recommended
Charging required
Empty
For information on key operations, refer to
“Parts and Controls” on page 4-18.
When turning on the handset, you will be asked
to enter a PIN (Personal Identification Number)
code. Enter it and press
B. For more
information, refer to “If You Upgrade Your
Handset” on page 3-16.