User Manual

15-127
Setting the Handset
Setting The Auto Keypad Lock
To avoid keys being pressed accidentally when carrying
the handset, you can set the auto keypad lock function to
disable key operations when the handset is closed. Each
time you slide the handset open or closed, the function
automatically turns off and on accordingly.
1 Press B.
The main menu appears.
2 Press a, b, c, or d to highlight “Settings” and
press B.
3 Press a or b to highlight “Phone settings” and
press B.
4 Press a or b to highlight “Auto keypad lock”
and press B.
5 Press “On” to initiate the function or “Off” to
cancel the function.
Pressing any key when the handset is closed, will
display the message “Keypad Locked” on the main
menu.
If you press any key when the handset is
closed, you will see the message “Keypad
Locked” on the main menu. After about 1
second, “Press and hold the Centre key to
unlock the keypad” appears. Press and hold
B
for 2 seconds to cancel the function.
When the function is set to “On,” you can still
take pictures by pressing and holding the
shutter release button (
X) for 2 seconds.
When the auto keypad lock and display power
saving function is set to “On,” you can still
check the time by pressing
B.
If you slide closed the handset while writing a
text message, sliding it open again will lead
you to the same text editor mode that you were
in when you slid it closed.