User Manual

14-120
Using the Call History
Clearing All Call Costs
1 At the main menu, select in the following order:
“Call Register” → “Call costs.”
2 Press a or b to highlight “Clear costs” and
press B.
3 Enter your PIN2 code and press B.
4 Press C [Yes].
The handset resets all call cost logs to zero.
If you want to cancel, press
A [No] in this step.
Setting the Charge Limit
If you wish to make sure that you do not exceed a certain
limit, set this function.
1 At the main menu, select in the following order:
“Call Register” → “Call costs.”
2 Press a or b to highlight “Max cost” and press
B.
3 Press a or b to highlight “Set limit” and press
B.
4 Enter your PIN2 code and press B.
5 Enter a cost per unit and press B.
To enter a decimal point, press R.
Checking the Remaining Credit
1 At the main menu, select in the following order:
“Call Register” → “Call costs.”
2 Press a or b to highlight “Residual credit” and
press B.
Once you reset the call cost logs, they cannot be
restored.
If you wish to check the current charge limit, select
“Read limit” in step 3 above.