User Manual

5-13
5
2. Connect the other end of the DV cable into the DV connector of the IEEE 1394
device.
3. Install the driver according to the instructions on the screen. Generally when you
connect the device to your computer, the necessary driver will be installed
automatically.
4. Start the appropriate application for handling your data.
Disconnecting IEEE1394 Device
1. Click the Safely Remove Hardware icon ( ) on the taskbar. If you cannot find
the icon, click
to show all kinds of icon. If the icon does not appear, go to
Step 3.
2. If the name of your device appears, click Safely remove xxxxx (xxxx is the name
of your IEEE 1394 device.); then, Safe To Remove Hardware dialog appears.
3. Remove the DV cable from your computer.
IEEE1394 connector
To IEEE1394
Compliant Device
DV Cable