User Manual

2-15
2
Adjusting Display
You can adjust the brightness, resolution, and number of colors of the internal LCD
display.
Changing Brightness of Display
Press Fn and F6 ( ) keys simultaneously to decrease the brightness of the internal
LCD display.
Press Fn and F7 (
) keys simultaneously to increase the brightness of the internal
LCD display.
Changing Resolution and Number of Colors
When shipped, your computer is set to the default resolution and color. The default
resolution is 1024 x 768 at 64K colors. To change the resolution and the number of
colors, follow the instructions below:
1. In the Display Properties dialog box, select Settings tab.
2. Select the number of the colors in the Color quality, and select the resolution in
the Screen resolution. Refer to the table below.
3. Click OK; then, Yes.
Resolutions and Colors you can choose
Resolution
Number of Colors
800 x 600 64K, 16M
(*2)
1024 x 768 64K, 16M
(*2)
1280 x 1024
(*1)
64K, 16M
1400 x 1050
(*1)
64K, 16M
1600 x 1200
(*1)
64K, 16M
(
*1
)
Can be chosen for an external monitor only when it is capable of the listed resolution
modes. Cannot be set when displaying on the LCD monitor only and on the LCD
and the external monitor simultaneously.
(
*2
)
On the internal LCD screen, the number of colors in this mode is made using
a Dithering algorithm.
• When you use the tablet pen at an 800 x 600 resolution, follow these
instructions to set the full screen mode. Otherwise, the cursor on the screen
will mismatch the tip of the pen.
1. In the Settings tab of the Display Properties dialog box, click