User Manual

A-16
Appendixes
14. After the recovery process completed, the system will start automatically. When
the message Press F2 for System Utilities appears, press F2. The Setup Utility
will open.
15. In the Exit menu, select Load Setup Defaults; then, press Enter twice.
16. In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter
twice. The system will restart.
17. Set up Windows, following the instructions on the screen. Make sure to set date
and time.
18. Remove the external optical drive if you don’t use it.
When you disconnect the external optical drive, you need to stop the
device. Follow the instructions on USB Device section of Chapter 5.