User Manual

7-7
7
Boot Sequence specifies where the system boots. Press Enter to open the sub menu.
The system boots from the drive at the top of the list. If the system cannot find the
drive, it will boot from the second one; then, third one; then forth one. Use arrow keys
to select the drive you want to move; then, use minus key or space bar to move it up
and down.
USB FDD/CD enables or disables the USB floppy disk drive and the USB optical
drive.
LAN Boot defines whether the system boots from other server via the LAN unit of the
computer.
Exit Menu
Exit Saving Changes saves the settings you have changed and exits the Setup Utility.
Exit Discarding Changes exits the Setup Utility without saving the settings you have
changed.
Load Setup Defaults returns the values of all items to the default. To exit, select one
of the above items.
Discard Changes returns the values of all items to the values you last saved. To exit,
select one of the above two items.
Save Changes saves the settings you have changed. To exit, select one of the above
two items.