User Manual

7-4

EC/KBC Version shows the EC or keyboard controller version of the system.

Advanced Menu

Tablet Device sets the tablet pen, selecting the base I/O address. Enabled means that

you can set the item by yourself. Auto means that the item is automatically assigned.

Disabled means that you cannot use the tablet pen.

Tablet Button Device enables or disables the programmable buttons.

Internal Pointing Device enables or disables the built-in glide pad.

System Beep controls the volume level of the beep before Windows starts.

Resolution Expansion defines whether the Setup Utility screen is expanded when the

resolution is 640x480 or 800x600. Enabled means that the screen is expanded.

Plug&Play O/S enables or disables plug & play function.

PCI Configuration normally has to be as default.

Security Menu

Set Supervisor Password defines the supervisor password (up to eight characters).

See the next section about the supervisor password.

Set User Password defines the user password (up to eight characters). See the next

section about the user password.

If you lose your password, you will be unable to access the computer or

change the configuration. Make sure to select a password you will never

forget, or write it down and protect it in a secure place. Otherwise, you

will have to contact your dealer for assistance.

Hard Disk boot Sector defines whether the boot sector of the hard disk is write-

protected. When formatting the hard disk or reinstalling software, set to Normal.

Password on boot defines whether you have to type the password for booting the

computer.