Operation Manual, User's Manual

1-4
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
Optional
(1) Finisher (100-sheet stapling)
This staples and outputs paper.
► FINISHER (100-SHEET STAPLING) (page 1-123)
(2) Saddle stitch finisher (100-sheet stapling)
This staples and folds paper.
► SADDLE STITCH FINISHER (100-SHEET
STAPLING) (page 1-136)
(3) Status indicator
The status of the machine is indicated.
► STATUS INDICATORS (page 1-151)
(4) Keyboard
Use this as a substitute for the soft keyboard displayed
on the touch panel. When not being used, it can be
stored under the operation panel.
► NAMES AND FUNCTIONS OF SOFT KEYBOARD
KEYS (page 1-166)
(5) Bypass tray
Use this tray to feed paper manually.
When loading paper larger than A4R or 8-1/2" × 11"R,
pull out the extension guide.
► LOADING PAPER INTO THE BYPASS TRAY (page
1-83)
(6) Saddle stitch finisher (50-sheet stapling)
This staples and folds paper.
► SADDLE STITCH FINISHER (50-SHEET
STAPLING) (page 1-128)
(7) Finisher (50-sheet stapling)
This staples and outputs paper.
► FINISHER (50-SHEET STAPLING) (page 1-119)
(8) Trimming module
This trims the excess of saddle-stitched output.
(9) Punch module
This punches and outputs paper.
(10) Curl correction unit
This punches and outputs paper.
(11) Tray 5 (MX-LC12)
Store paper in this tray. Up to 3500 sheets can be stored.
► LOADING PAPER IN THE LARGE CAPACITY
TRAY (page 1-73)
(12) Tray 5 (MX-LCX3 N)
Store paper in this tray. Up to 3000 sheets can be stored.
► LOADING PAPER IN THE LARGE CAPACITY
TRAY (page 1-73)
(7) (8) (9) (10) (11) (12)(6)
(3)(1) (2) (5)(4)