Operation Manual, User's Manual
Table Of Contents
8-11
SYSTEM SETTINGS►SETTING MODE LIST
*1 When a saddle stitch finisher/saddle stitch finisher (large stacker) is installed.
*2 When an inner finisher/finisher/finisher (large stacker)/saddle stitch finisher/saddle stitch finisher (large stacker) is installed.
*3 When a finisher/finisher (large stacker)/saddle stitch finisher/saddle stitch finisher (large stacker) is installed and a punch module
is installed.
Disabling Registration of Custom Image Disabled No Yes 2-104
Disabling sending while copying Disabled No Yes 2-134
High Quality Scan from Document Feeder Disabled No Yes
2-100
Quick Scan from Document Glass Disabled No Yes
Auto Clear Before Copy Execution Also Disabled No Yes 2-5
Initial Status Settings
Image Orientation Portrait No Yes
2-7
Paper Tray
Varies depending on the
machine configuration
No Yes
Exposure Type Auto No Yes
• Copy of Copy Disabled No Yes
Copy Ratio 100% No Yes
• Select magnification automatically according to
paper size, when paper tray is selected.
Disabled
No Yes
2-Sided Copy 1-Sided→1-Sided No Yes
Original Binding Book No Yes
2-8
Output Binding Book No Yes
Output Auto No Yes
Output Tray
Varies depending on the
machine configuration
No Yes
Offset Enabled No Yes
Separator Page No Yes
• Insert Before Job Disabled No Yes
• Insert After Job Disabled No Yes
Staple Sort
*2
– No Yes
Staple Position
*2
– No Yes
Punch
*3
– No Yes
Fold
*1
Fold inside No Yes
• Fold Multiple Sheets Together Disabled No Yes
Text /Image Printing
Text Settings (Stamp) – No Yes 2-101
Custom Stamp – No Yes 2-104
Custom Watermark – No Yes 2-104
Setup Items
Factory default setting
U A Page