Operation Manual, User's Manual
Table Of Contents
2-40
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Staple ON (excluding booklet)
1
Tap the [Staple / Punch] key.
► COPY MODE (page 2-3)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-28)
2
Select the number of staples and
staple position.
• After the settings are completed, tap .
• A binding position cannot be selected for stapleless
stapling.
In normal mode
• Tap the [Output] key, and tap the [Staple] tab.
• If you need to change the output tray, tap the [Output Tray] key and select the output destination before selecting
stapling.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap [Continue] or [Cancel].
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
CA
Preview
Start
Copies
Staple / Punch
Staple
Off
Off
Position
Punch
Off
1 Staple
2 Staples
Saddle
Stitch
Trimmer
Setting
1
Original
Left
To p
Right
Position
Others
Upper Tray
Middle
Tray
Lower Tray
Output Tray
Output
Change Size/Direction.
Original
Put Multiple Pages in A Page
N-Up
Shift Position to Have Margin
Margin Shift
Erase Shadow Around
Erase
2-Sided Copy
Proof Copy
CAPreview
Start
Offset
No. of copies
Separator Page
Sort/Group Staple Punch Fold
Right Tray
Output Tray
4
A3
3
B4
A4