Operation Manual, User's Manual

2-37
COPIER►BASIC PROCEDURE FOR MAKING COPIES
CHANGING OUTPUT DESTINATION
Specify the destination to output copies.
1
Tap the [Detail] key to change to normal mode.
► SELECTING COPY MODE (page 2-4)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-28)
2
Tap the [Output] key.
3
Select the output tray from "Output
Tray".
After the settings are completed, tap .
• If a finisher (large stacker) or saddle stitch finisher (large stacker) is installed, select the [Upper Tray], [Middle Tray] or
[Lower Tray] key.
• If a finisher or saddle
stitch finisher is installed, select the [Top Tray] or [Finisher Tray] key.
Others
Upper Tray
Middle
Tray
Sort
Group
Lower Tray
Output Tray
Output
Auto
Sort/Group
Change Size/Direction.
Original
Put Multiple Pages in A Page
N-Up
Shift Position to Have Margin
Margin Shift
Erase Shadow Around
Erase
2-Sided Copy
Proof Copy
CAPreview
Start
4
A3
3
B4
A4
Offset
No. of copies
Staple Punch Fold
Separator Page
Right Tray
Output Tray
1