Operation Manual, User's Manual

2-35
COPIERBASIC PROCEDURE FOR MAKING COPIES
OUTPUT
Configure the output settings for copies using Sort, Group, Offset, Separator Page, Staple, Punch, or Fold. Also specify
the output destination of copies.
You can tap the [Output] key in normal mode to configure settings for all output functions.
Settings for the staple and punch functions can also be configured from simple mode.
Output Tray
Specify the destination to output copies.
If a finisher (large stacker) or saddle stitch finisher (large stacker) is installed, you can select [Upper Tray], [Middle Tray],
or [Lower Tray].
If a finisher or saddle stitch finisher is installed, you can select [Top Tray] or [Finisher Tray].
CHANGING OUTPUT DESTINATION (page 2-37)
Offset
This function outputs copies while shifting them set by set. Setting the checkbox to enables the offset function, and
setting it to
disables the function.
This function is available when a finisher or saddle stitch finisher is installed and [Upper Tray], [Lower Tray] or [Finisher Tray]
is selected as the output tray.
Selecting the staple function clears the Offset checkmark automatically.
Others
Upper Tray
Middle
Tray
Sort
Group
Lower Tray
Output Tray
Output
Auto
Sort/Group
Change Size/Direction.
Original
Put Multiple Pages in A Page
N-Up
Shift Position to Have Margin
Margin Shift
Erase Shadow Around
Erase
2-Sided Copy
Proof Copy
CAPreview
Start
4
A3
3
B4
A4
Offset
No. of copies
Staple Punch Fold
Separator Page
Right Tray
Output Tray
1
[Output] screen of normal mode
Offset enabled Offset disabled