Operation Manual, User's Manual

1-184
BEFORE USING THE MACHINEPERIPHERAL DEVICES
SADDLE STITCH FINISHER (LARGE
STACKER)
This includes the offset function that outputs sorted paper while staggering each set of paper, the staple sort function
that staples each set of prints, the saddle stitch function that automatically staples the centre of the sheets and folds the
sheets in half, and the paper folding function that folds paper in half.
To punch holes in printed paper, install an optional hole punch module.
PART NAMES
(1) Staple compiler
This temporarily stacks paper to be stapled.
(2) Output tray
Stapled and offset output is delivered to this tray.
The tray is slidable. Extend the tray for printing on
large-size paper (A3W, A3, B4, 12" × 18", 11" × 17",
8-1/2" × 14" and 8-1/2" × 13" sizes).
(3) Middle output tray
Output paper that will not be offset in this tray.
The tray is slidable. Extend the tray for printing on
large-size paper (A3W, A3, B4, 12" × 18", 11" × 17",
8-1/2" × 14" and 8-1/2" × 13" sizes).
(4) Saddle stitch tray
Saddle-stitched output is delivered to this tray.
(5) Front cover
Open this cover to replace the staple cartridge or remove
a staple jam.
(2)
(4)
(1)
(5)
(3)
To install a saddle stitch finisher (large stacker), a paper pass unit is required.
Do not place heavy objects on the saddle stitch finisher (large stacker) or press down on the saddle stitch finisher (large
stacker).
Exercise caution when you turn on the power and when printing take place, as the tray may move up and down.
A saddle stitch finisher (large stacker) cannot be installed simultaneously with an inner finisher, finisher, finisher (large
stacker) or saddle stitch finisher.