Operation Manual, User's Manual

1-9
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
DATA NOTIFICATION INDICATOR AND ERROR INDICATOR
The data notification indicator and the error indicator lights solidly or blinks to indicate the status of the machine.
Error indicator (red) Data notification indicator (green)
Pattern 1 Pattern 2 Pattern 3
Solidly Errors that do not stop machine
operation, such as replacement
timing of the waste toner box.
Job in progress, such
as paper feeding or
output.
Ready state or other
state where jobs can
be accepted.
An original has been
placed in the
document feeder
Blinks Errors that stop machine
operation, such as misfeeds
and out of toner.
A fax is being received
When the job separator (upper tray) or exit tray unit (right tray) is used for
output, this blinks until the output is removed.
On/Blinking
Priority
Blinking Priority Blinking Priority Blinking Priority On Priority
•
To set the status indicated by the data notification indicator
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Status Indicator Setting]
→ [Data Indicator Setting].
• To set the error indication
Set in "Settings (administrator)"
→ [System Settings] → [Common Settings] → [Device Control] → [Status Indicator Setting]
→
[Error Light Setting].