MX-M550U/N/M620U/N/M700U/N Operation-Manual Administrator-Settings-Guide GB
Table Of Contents
- Contents page
- PURPOSE OF THE ADMINISTRATOR SETTINGS
- ADMINISTRATOR SETTINGS LIST
- USING THE ADMINISTRATOR SETTINGS
- GENERAL SETTINGS
- Account control
- Job log control
- Energy save
- Operation settings
- Device control
- Original size detector setting
- Disabling of document feeder
- Disabling of duplex
- Disabling of large capacity cassette
- Disabling of stapler
- Disabling of punch
- Disabling of finisher
- Disabling of inserter
- Disabling of covers/inserts mode
- Saddle stitch position adjust
- [AUTOMATIC SADDLE STITCH] checkmark
- Saddle stitch stapling exceptions
- Auto switching of finisher trays
- Rotated output
- Auto paper selection setting
- Optimization of a hard disk
- Network settings
- Security settings
- List print
- Sharp OSA settings
- Change admin password
- Product key
- Initialize and/or store settings
- COPY SETTINGS
- Copy settings
- Initial status settings
- Exposure adjustment
- Rotation copy setting
- Add or change extra preset ratios
- Initial margin shift setting
- Erase width adjustment
- Card shot settings
- Initial tab copy setting
- Setting a maximum number of copies
- Disabling deletion of job programs
- Disabling of bypass-tray in duplex copy
- Disabling of auto paper selection
- Copy settings
- DOCUMENT FILING SETTINGS
- TO THE ADMINISTRATOR OF THE MACHINE
21
Information that the administrator of the machine requires is printed
on the back of this page.
(Separate this page from the manual and keep it in a safe place. In
addition, fill in the name of the administrator and the administrator's
contact information in the left hand margin.)
Administrator Name: Contact at:
✂