MX-M550U/N/M620U/N/M700U/N Operation-Manual Administrator-Settings-Guide GB
Table Of Contents
- Contents page
- PURPOSE OF THE ADMINISTRATOR SETTINGS
- ADMINISTRATOR SETTINGS LIST
- USING THE ADMINISTRATOR SETTINGS
- GENERAL SETTINGS
- Account control
- Job log control
- Energy save
- Operation settings
- Device control
- Original size detector setting
- Disabling of document feeder
- Disabling of duplex
- Disabling of large capacity cassette
- Disabling of stapler
- Disabling of punch
- Disabling of finisher
- Disabling of inserter
- Disabling of covers/inserts mode
- Saddle stitch position adjust
- [AUTOMATIC SADDLE STITCH] checkmark
- Saddle stitch stapling exceptions
- Auto switching of finisher trays
- Rotated output
- Auto paper selection setting
- Optimization of a hard disk
- Network settings
- Security settings
- List print
- Sharp OSA settings
- Change admin password
- Product key
- Initialize and/or store settings
- COPY SETTINGS
- Copy settings
- Initial status settings
- Exposure adjustment
- Rotation copy setting
- Add or change extra preset ratios
- Initial margin shift setting
- Erase width adjustment
- Card shot settings
- Initial tab copy setting
- Setting a maximum number of copies
- Disabling deletion of job programs
- Disabling of bypass-tray in duplex copy
- Disabling of auto paper selection
- Copy settings
- DOCUMENT FILING SETTINGS
- TO THE ADMINISTRATOR OF THE MACHINE
19
DOCUMENT FILING SETTINGS
Scan complete sound setting
The volume of the beep that alerts you when scanning
of an original has finished can be adjusted to two
levels.
The beep can also be turned off.
Initial resolution setting
This is used to change the default resolution setting for
"SCAN TO HDD" of the document filing function. The
default resolution is initially set to "600x600dpi". To
change the default resolution, touch the key of the
desired resolution.
Default exposure settings
This is used to change the default exposure level for
"SCAN TO HDD" of the document filing function. The
default exposure is initially set to "AUTO". If changed to
"MANUAL", the exposure level can be adjusted to five
levels. Level 1 is the lightest level and level 5 is the
darkest level.
Batch print settings
When printing files by batch printing, this setting is
used to prohibit the selection of the [ALL USERS] key
and the [USER UNKNOWN] key in the user selection
screen.