MX-M550U/N/M620U/N/M700U/N Operation-Manual Administrator-Settings-Guide GB

15
GENERAL SETTINGS
Product key
Use these settings to enter the product keys for the
following options.
PS3 expansion kit
This setting is used to enter the product key for the PS3
expansion kit (this allows the machine to be used as a
PostScript compatible printer).
Ask your dealer for the product key.
Network scanner expansion kit
This setting is used to enter the product key for the
network scanner expansion kit.
Ask your dealer for the product key.
Internet fax expansion kit
This setting is used to enter the product key for the
Internet fax expansion kit.
Ask your dealer for the product key.
E-mail alert and status
This setting is used to enter the product key for E-MAIL
ALERT AND STATUS, which enables customer
product support via a network system.
Ask your dealer for the product key.
Network expansion kit
This setting is used to enter the product key that allows
the machine to be used on a network.
Ask your dealer for the product key.
Data security kit
This setting is used to enter the product key for the data
security kit.
Ask your dealer for the product key.
Application integration module
This setting is used to enter the product key that allows
use of the metadata send function.
Ask your dealer for the product key.
Application communication module
This setting is used to enter the product key that allows
the machine to be linked to a "standard application".
Ask your dealer for the product key.
External account module
This setting is used to enter the product key that allows
the machine to be linked to an "external account
application".
Ask your dealer for the product key.
Serial number
This setting is used to check the serial number of the
machine.
Initialize and/or store settings
These settings are used to return the administrator
settings to the factory default settings, to store the
current settings, and to restore stored administrator
settings. (Note that this also includes printer
configuration settings.)
The following settings are available:
● Restore factory defaults
● Store current configuration
● Restore configuration
Restore factory defaults
This setting is used to return the administrator settings
(including the printer configuration settings) to the
factory default settings. If you need a record of the
settings prior to restoration of the default settings, use
"List print" (page 12) to print a list of the settings.
Store current configuration
This setting is used to store the current administrator
settings in memory. The stored settings will remain in
memory even if the power switch is tur ned off. To retrieve
the stored settings, use the following "Restore
configuration" setting.
Restore configuration
This setting is used to retrieve the configuration that was
stored using the "Store current configuration" setting and
restore it as the current configuration.
The currently set configuration will change to the
configuration read from memory.
NOTE
To make the default settings take effect after
executing this setting, exit the administrator settings,
turn off the power switch, wait at least 3 seconds,
and then turn on the power switch again.
NOTE
A confirmation message will appear at the end of the
procedure for executing settings marked by *1. If you
need to cancel execution of the setting, touch the
[NO] key.
*1
*1
*1