Operation Guide GB

1-45
BEFORE USING THE MACHINE
Contents
This section describes the peripheral devices that can be used with the machine and explains how to use the finisher, as
well as Sharp OSA (application communication module and external account module).
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard
equipment.
(As of September, 2013)
PERIPHERAL DEVICES
Product name Product number Description
Stand/1x500 sheet paper drawer MX-DE12
Additional tray. A maximum 500 sheets of paper can be loaded
in each tray.
Stand/2x500 sheet paper drawer MX-DE13
Stand/3x500 sheet paper drawer MX-DE14
Stand/500&2000 sheet paper
drawer
MX-DE20
Additional paper trays. Tray 2 can hold a maximum of 500
sheets of paper, tray 3 can hold a maximum of 1150 sheets, and
tray 4 can hold a maximum of 850 sheets.
Large capacity tray MX-LC11
Additional paper trays. Tray 2 can hold a maximum of 500
sheets of paper, tray 3 can hold a maximum of 1150 sheets, and
tray 4 can hold a maximum of 850 sheets.
Exit tray unit
(Right tray)
MX-TR13 N This can be added to the right side of the machine.
Long paper feeding tray MX-LT10 Long paper with a size up to 1200 mm can be loaded.
Finisher MX-FN17
Output device that enables the use of the staple function and
offset function.
Finisher (large stacker) MX-FN11
Output device that enables the use of the staple function and
offset function.
Saddle stitch finisher MX-FN10
Output device that enables the use of the staple function and
offset function.
Saddle stitch finisher
(large stacker)
MX-FN18
Output device that enables the use of the staple function and
offset function.
Punch module
MX-PN11A
MX-PN11B
MX-PN11C
MX-PN11D
Punches holes in copies and other output. Requires a finisher.
MX-PNX5A
MX-PNX5B
MX-PNX5C
MX-PNX5D
This unit punches holes in copies and other output. A saddle
stitch finisher is required.
MX-PNX6A
MX-PNX6B
MX-PNX6C
MX-PNX6D
This unit punches holes in copies and other output. A finisher
(large stacker) or saddle stitch finisher (large stacker) is
required.
Barcode font kit MX-PF10 Adds barcode fonts to the machine.