Operation Guide GB

5-68
SCANNER/INTERNET FAX
Contents
CHANGING THE COLOUR MODE
This procedure is used to change the colour mode used to scan the original when the [START] key is pressed.
This function cannot be used in Internet fax mode.
Mode Scanning method
Auto
The machine detects whether the original is colour or black and white and automatically selects full
colour or black and white (Mono2 or Grayscale) scanning.
Full Colour The original is scanned in full colour. This mode is best for full colour originals such as catalogues.
Grayscale The colours in the original are scanned in black and white as shades of grey (greyscale).
Mono2 Colours in the original are scanned as black or white. This mode is best for text-only originals.
1
Select the mode and display the colour mode settings screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Colour Mode] key.
+ IMAGE SETTINGS (page 5-53)
2
Read the displayed message and touch
the [OK] key.
A message does not appear in USB memory mode. Go to the
next step.
When a broadcast transmission is performed using mixed send modes, the image is sent in Mono2.
3
Select the colour mode.
(1) Touch the key of the desired colour mode.
You can select whether black & white scanning will take
place in Mono2 or greyscale when [Auto] is selected and
a black and white original is scanned. Note that if the file
format is set to JPEG, scanning will take place in
greyscale.
(2) Touch the [OK] key.
System Settings (Administrator): Default Colour Mode Settings
The default colour mode can be changed.
Image will be sent in [Mono2]
if Fax or I-Fax destination is included.
OK
OK
B/W Mode
Full Colour
Scan/Colour Mode
(1) (2)