Operation Manual, Software Setup Guide, GB

37
MAC OS X
X Printing using the IPP function
The machine can print using the IPP function. When the machine is in a remote location, this function can be used in
place of the fax function to print a higher quality image than a fax. If you wish to use the IPP function, follow these steps
to select the PPD file when configuring the printer driver (step 14 on page 35).
(1) Click the [IP Printer] icon.
If you are using Mac OS X 10.5 / 10.6 / 10.7 / 10.8,
click the [IP] icon.
(2) Select [Internet Printing Protocol] in
"Protocol". Enter the address of the
machine (IP address or domain name)
and the queue name.
Enter "ipp" in "Queue".
(3) Select [Sharp] in "Print Using" and
click the PPD file of your model.
If you are using Mac OS X 10.5 / 10.6 / 10.7 / 10.8,
select [Select a driver to use] (or [Select Printer
Software]) from "Print Using" and click the PPD file
for your model.
(4) Click the [Add] button.
The "Installable Options" screen will appear. Make
sure that the settings are correct and click the
[Continue] button.
☞ Checking the IP address of the machine (page 6)
(1)
(2)
(4)
(3)