Operation Manual, Software Setup Guide, GB

35
MAC OS X
+
14
Configure thlr driver.
• The machine can print using the IPP function. If you wish to use the IPP function, see "Printing using the IPP function"
(page 37) to configure the printer driver settings.
(1) Click the [Default Browser] icon.
If you are using Mac OS X 10.5 / 10.6 / 10.7 / 10.8,
click the [Default] icon.
(2) Click the machine's model name.
• Using with AppleTalk:
The machine's model name usually appears as
[SCxxxxxx]*.
• Using with Bonjour:
The machine's model name usually appears as
[RDVxxxxxx]*.
* "xxxxxx" is a sequence of characters that varies
depending on your model.
(3) Make sure that the PPD file of your
model is selected.
The PPD file of the machine is automatically selected.
(4) Click the [Add] button.
• Using with AppleTalk:
The PPD file of the machine is automatically
selected and the peripheral devices installed on
the machine are detected and automatically
configured.
• Using with Bonjour:
The "Installable Options" screen appears. Select
the machine configuration and click the
[Continue] button.
(1)
(2)
(4)
(3)
The PPD file is installed in the following folders on the startup disk.
[Library] - [Printers] - [PPDs] - [Contents] - [Resources] - [en.lproj]