Operation Manual, Software Setup Guide, GB

33
This chapter explains how to install the PPD file to enable printing from a Macintosh and how to configure the printer
driver settings.
☞ MAC OS X: this page
(10.4 / 10.5 / 10.6 / 10.7 / 10.8)
MAC OS X
1
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows "Disc 1" on the
front of the CD-ROM.
2
Double-click the [CD-ROM] icon ( ) on
the desktop.
3
Double-click the [MacOSX] folder.
Before installing the software, be sure to read "ReadMe
First". "ReadMe First" is in the [US-English] folder
([English] folder in areas other than the U.S.) in the
[Readme] folder.
4
Double-click the folder corresponding
to the versions of the operating system.
5
Double-click the [MX-C26] icon ( ).
6
Click the [Continue] button.
3
SETUP IN A MACINTOSH
ENVIRONMENT
• The printer expansion kit and PS3 expansion kit are required to use the machine as a printer in a Macintosh
environment. In addition, the machine must be connected to a network. A USB connection cannot be used.
• The scanner driver and PC-Fax driver cannot be used in a Macintosh environment.
The explanations of screens and procedures are primarily for Mac OS X 10.4. The screens may vary in other versions of the
operating system.