MX-M350U/N/M450U/N Operation-Manual Scanner GB
Table Of Contents
- INTRODUCTION
- TABLE OF CONTENTS
- ABOUT THE NETWORK SCANNER FUNCTION
- SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE
- ACCESSING WEB PAGES
- ABOUT THE WEB PAGES (FOR USERS)
- ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
- BASIC SETTINGS FOR NETWORK SCANNING
- SETTING UP DESTINATION INFORMATION
- STORING SENDER INFORMATION (Scan to E-mail)
- SETTING UP INTERNET-FAX PARAMETERS
- SETTING UP SERVERS
- PROTECTING INFORMATION PROGRAMMED IN THE WEB PAGE ("Passwords")
- BASE SCREEN
- SENDING AN IMAGE
- DESTINATION INPUT METHODS
- SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION AND FILE FORMAT)
- SPECIAL MODES
- PROGRAMMING FREQUENTLY USED OPERATIONS (PROGRAM)
- ERASING EDGE SHADOWS (ERASE)
- TRANSMITTING A DIVIDED ORIGINAL (DUAL PAGE SCAN)
- AUTOMATIC TRANSMISSION AT A SPECIFIED TIME (TIMER TRANSMISSION)
- TRANSMITTING TWO ORIGINAL PAGES AS A SINGLE PAGE (2IN1)
- TRANSMITTING THE FRONT AND BACK SIDES OF A CARD ON ONE SHEET OF PAPER (CARD SHOT)
- TRANSMITTING A LARGE NUMBER OF PAGES (JOB BUILD)
- CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT (TRANSACTION REPORT)
- PRIORITY TRANSMISSION OF A STORED JOB
- CANCELLING AN SCAN TRANSMISSION
- RECEIVING AN INTERNET FAX
- TRANSFERRING RECEIVED INTERNET-FAXES TO ANOTHER MACHINE WHEN PRINTING IS NOT POSSIBLE (FORWARDING FUNCTION)
- FORWARDING RECEIVED INTERNET FAXES TO AN E-MAIL ADDRESS (INBOUND ROUTING SETTINGS)
- METADATA DELIVERY (DATA ENTRY)
- PREPARATIONS FOR METADATA TRANSMISSION
- TRANSMITTING METADATA
- STORING FROM THE OPERATION PANEL
- STORING ONE-TOUCH KEYS (only addresses for Scan to E-mail and Internet-Fax)
- EDITING AND DELETING ONE-TOUCH KEYS
- PROGRAMMING A GROUP KEY
- EDITING AND DELETING GROUP KEYS
- STORING SENDER INFORMATION
- EDITING AND DELETING SENDER INFORMATION
- STORING A GROUP INDEX
- PRINTING PROGRAMMED INFORMATION
- STORING A PROGRAM
- EDITING AND DELETING PROGRAMS
- TROUBLESHOOTING
- ADMINISTRATOR SETTINGS
- NETWORK SCANNER / INTERNET FAX SPECIFICATIONS
- NUMBER OF ITEMS THAT CAN BE STORED WHEN A HARD DRIVE IS INSTALLED, AND WHEN NOT INSTALLED
INTRODUCTION
This manual explains the scanner function, the Internet fax function, and the metadata send function of the machine.
To use these functions, the following expansion kits must be installed.
Network scanner function: The network scanner expansion kit must be installed.*
1
Internet fax function: The network scanner expansion kit and Internet fax expansion kit must be installed.*
2
Metadata send function:
The network scanner expansion kit and application integration module must be installed.*
2
*1 If you are using the MX-M350U/450U, the network expansion kit must also be installed.
*2 To use the Internet fax or metadata send functions, a hard drive must be installed in the machine. For this reason,
on the MX-M350U/450U, the network expansion kit (with hard drive) must also be installed.
For other functions, see the following manuals.
Operation manual (for general information and copier operation):
This contains safety precautions and general information such as the
procedures for loading paper, removing misfeeds, and using peripheral
equipment. It also provides detailed explanations of the procedures for using
the copy function.
Administrator settings guide: This explains the "administrator settings", which are used to configure a variety
of machine parameters to suit the aims and the needs of your workplace.
Operation manual (for printer): This provides detailed explanations of the procedures for using the printer
function.
NOTES
● For information on installing the drivers and software cited in this manual, please refer to the software setup
guide and the manuals that are provided with the expansion kits.
● Before using the network scanner feature, several settings must be established from the Web page. These
settings are explained from page 1-4
on. The settings must be established by the network administrator. Such
settings must be effected by the system administrator who has the special network related backgrounds.
● The explanations in this manual assume that the person who will install the product and the users of the product
have a working knowledge of Microsoft Windows.
● The explanations of screens and procedures in this manual are for Windows XP. The screens may vary
depending on your Windows version and settings.
● For information on the operating system, please refer to your operating system manual or the online Help
function.
● This manual assumes that several options have been installed.
● This manual assumes that the document filing function can be used. The document filing function can only be
used on the MX-M350N/450N, and on models in which the network expansion kit (with hard drive) is installed.
The display screens, messages, and key names shown in the manual may differ from those on the actual
machine due to product improvements and modifications.