MX-M350U/N/M450U/N Operation-Manual Printer GB
Table Of Contents
- INTRODUCTION
- TABLE OF CONTENTS
- BASIC PRINTING PROCEDURE
- USING ACCOUNT NUMBERS WHEN PRINTING
- VIEWING PRINTER DRIVER HELP
- SAVING FREQUENTLY USED PRINT SETTINGS
- CHANGING THE PRINTER DRIVER DEFAULT SETTINGS
- BASIC PRINTING PROCEDURE
- USING ACCOUNT NUMBERS WHEN PRINTING
- FREQUENTLY USED FUNCTIONS
- CONVENIENT PRINTING FUNCTIONS
- CREATING A PAMPHLET (Pamphlet/Pamphlet Staple)
- INCREASING THE MARGIN (Margin Shift)
- ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees)
- ENLARGING/REDUCING THE PRINT IMAGE (Scale/XY-Zoom)
- REVERSING THE IMAGE (Mirror Image)
- ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE (Image Adjustment)
- PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black)
- ADDING A WATERMARK TO PRINTED PAGES (Watermark)
- CREATING OVERLAYS FOR PRINT DATA (Overlays)
- PRINTING SPECIFIED PAGES ON DIFFERENT PAPER (Different Paper)
- ADDING INSERTS WHEN PRINTING ON TRANSPARENCY FILM (Transparency Inserts)
- PRINTING A CARBON COPY (Carbon Copy)
- USING TWO MACHINES TO PRINT A LARGE PRINT JOB (Tandem Print)
- SAVING AND USING PRINT FILES (Retention/Document Filing)
- REMOTE OPERATION VIA A NETWORK
- ABOUT THE WEB PAGES (FOR USERS)
- ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
- MAKING CONFIGURATION SETTING
- HOLD JOB LIST
- ADMINISTRATOR SETTINGS
- DESCRIPTION OF SETTINGS
- TROUBLESHOOTING
- PRINTER DRIVER SPECIFICATIONS
- PRINTER SPECIFICATIONS
- NOTICE PAGE PRINTING
- PRINT AREA
MAKING CONFIGURATION SETTING
6-5
■ Line thickness
This setting is used to adjust the line width of vector graphics. For example, if you desire a finer line, select a value
from 0 to 4. If you desire a thicker line, select a value from 6 to 9. To return to the standard line thickness, select 5.
Use this setting for special applications such as CAD when lines do not appear with sufficient clarity. For regular
applications, there is usually no need to change the setting.
Default setting: 5
The relation between the setting values and the change of line thickness are as follows.
*1 All lines are 1-dot lines.
PCL settings
■ PCL symbol set setting
This setting is used to select which country's characters are used for certain of the symbols in the character code
table of the PCL symbol set. (Use this setting when you need to select symbols that differ by country.)
Default setting: "3" (PC-8)
See page 10-6
for the symbol set settings.
You can also print the "PCL SYMBOL SET LIST" in "LIST PRINT" (see page 2-14 of "Operation manual (for
general information and copier operation)") for a table that shows correspondences between numeric values and
symbol sets.
■ PCL font setting
This setting is used to select the font for printing.
Default setting: "0" (Courier) (resident font)
If the optional extended font kit is installed, you can also select from these fonts. In addition, the "PCL INTERNAL
FONT LIST" in "PRINTER TEST PAGE" of "LIST PRINT" (see page 2-14 of "Operation manual (for general
information and copier operation)") can be printed.
When the optional extended font kit is installed, the "PCL EXTENDED FONT LIST" can be printed.
■ PCL LINE FEED CODE
This setting is used to select how the printer responds when a line break command is received.
Default setting: 0.CR=CR; LF=LF; FF=FF
■ WIDE A4
When this setting is enabled, up to 80 characters can be printed on one line of A4 size paper using 10 CPI font
(8 bit characters). When disabled, up to 78 characters can be printed.
Default setting: Disabled
PostScript settings
This setting specifies whether an error page describing the cause of an error is printed or not when a PostScript
error has occurred.
Selections are available to choose printing or not printing of error pages.
Default setting: Not print
Value
0123456789
Thickness change
1dot
*1
50% 75% 90% 95% 100% 105% 110% 125% 150%