MX-M350U/N/M450U/N Operation-Manual Printer GB
Table Of Contents
- INTRODUCTION
- TABLE OF CONTENTS
- BASIC PRINTING PROCEDURE
- USING ACCOUNT NUMBERS WHEN PRINTING
- VIEWING PRINTER DRIVER HELP
- SAVING FREQUENTLY USED PRINT SETTINGS
- CHANGING THE PRINTER DRIVER DEFAULT SETTINGS
- BASIC PRINTING PROCEDURE
- USING ACCOUNT NUMBERS WHEN PRINTING
- FREQUENTLY USED FUNCTIONS
- CONVENIENT PRINTING FUNCTIONS
- CREATING A PAMPHLET (Pamphlet/Pamphlet Staple)
- INCREASING THE MARGIN (Margin Shift)
- ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees)
- ENLARGING/REDUCING THE PRINT IMAGE (Scale/XY-Zoom)
- REVERSING THE IMAGE (Mirror Image)
- ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE (Image Adjustment)
- PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black)
- ADDING A WATERMARK TO PRINTED PAGES (Watermark)
- CREATING OVERLAYS FOR PRINT DATA (Overlays)
- PRINTING SPECIFIED PAGES ON DIFFERENT PAPER (Different Paper)
- ADDING INSERTS WHEN PRINTING ON TRANSPARENCY FILM (Transparency Inserts)
- PRINTING A CARBON COPY (Carbon Copy)
- USING TWO MACHINES TO PRINT A LARGE PRINT JOB (Tandem Print)
- SAVING AND USING PRINT FILES (Retention/Document Filing)
- REMOTE OPERATION VIA A NETWORK
- ABOUT THE WEB PAGES (FOR USERS)
- ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
- MAKING CONFIGURATION SETTING
- HOLD JOB LIST
- ADMINISTRATOR SETTINGS
- DESCRIPTION OF SETTINGS
- TROUBLESHOOTING
- PRINTER DRIVER SPECIFICATIONS
- PRINTER SPECIFICATIONS
- NOTICE PAGE PRINTING
- PRINT AREA
ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
5-11
■ Status message setup
Use the status message function to send the
current counter information, including the copy
count, print count, and total output count, based on
the specified schedule. The destinations can be set
for administrators and dealers respectively.
To set up the status message, follow these steps.
1
Click [Status Message] in the menu frame.
The "Status Message
Setup" screen will
appear.
2
Enter the required information, including
the destination addresses and time
schedule.
For detailed information, click the [Help] button in
the upper right-hand corner of the window.
3
Click [Submit] to store the entered
information.
When the E-mail Status settings are completed, printer
count information will be sent periodically by e-mail to
the specified e-mail addresses.
■ Alerts message setup
Use the alert message function to send alert
information, such as empty toner and paper and
trouble including paper misfeeds, to specified
destinations when such problems occur. The
destinations can be set for administrators and
dealers respectively.
To set up the alert message, follow the procedure
below.
1
Click [Alerts Message] in the menu frame.
The "Alerts Message
Setup" screen will
appear.
2
Enter the destination addresses.
For detailed information, click the [Help] button in
the upper right-hand corner of the window.
3
Click [Submit] to store the entered
information.
If these parameters are set, event information for the
printer will be transmitted to the specified addresses
via E-mail each time a specified event occurs. The
meaning of each event item is shown below.
Example:
Paper Jam: A paper misfeed has occurred.
Toner Low: Toner is low.
Toner Empty: Toner must be added.
Paper Empty: Paper must be loaded.
NOTE
If you quit the browser before clicking [Submit], the
settings will be cancelled. To send printer information
immediately to the specified e-mail addresses, click
[Send Now].
NOTE
If you quit the browser before clicking [Submit], the
settings will be cancelled.