MX-M350U/N/M450U/N Operation-Manual Printer GB

5-5
ABOUT THE WEB PAGES (FOR THE
ADMINISTRATOR)
In addition to the menus that appear for users, other menus that can only be used by the administrator appear in the
administrator Web pages.
A menu frame appears on the left side of the page. When you click an item in the menu, a screen appears in the right frame
that allows you to configure settings for that item. Settings that can only be configured by the administrator are explained here.
(1) Information
Configure machine identification information for
the status & alert E-mail function.
(page 5-10)
(2) Passwords
Passwords can be established to allow the system
administrator to protect the Web site.
Enter the passwords that you wish to establish and
click the [Submit] button.
There are two types of password authentication:
one for users and one for administrators.
(page 5-6)
(3) Pull print (Panel)
The machine has a direct print function that lets
you print a PDF file or TIFF file from the operation
panel without using the printer driver. This screen
is used to enter the FTP servers that store the files.
Up to four FTP servers can be entered.
(page 5-7)
(4) Status Message
Use this to set up a schedule for sending specified count
information such as the total count and the output counts
for the printer and copy functions. The e-mail addresses
of the recipients and the schedule must be entered.
(page 5-11)
(5) Alerts Message
This is used to send information on error conditions
such as when the machine runs out of paper or toner,
or a misfeed or failure occurs. The e-mail addresses
of the recipients of the information must be entered.
(page 5-11)
(6) Security
Unused ports can be disabled for greater security
and port numbers can be changed.
(7) Services
Configure information concerning the e-mail
system.
(page 5-10)
(8) Print Port
This is used to configure settings for E-mail print.
(page 5-9)
(8)
(7)
(2)
(1)
(5)
(4)
(6)
(3)