MX-M350U/N/M450U/N Operation-Manual Copier GB
Table Of Contents
- Part 1: General Information
- PRODUCT CONFIGURATIONS
- OPERATION MANUALS
- INSTALLATION REQUIREMENTS
- CAUTIONS
- CONTENTS
- CHAPTER 1
- CHAPTER 2
- LOADING PAPER
- Loading paper in paper tray 1
- Changing the paper size in paper tray 1
- Specifications of paper trays
- Setting the paper type and paper size
- Setting the paper size when a special size is loaded
- Programming and editing paper types
- Loading paper in the multi purpose drawer
- Specifications (multi purpose drawer)
- Loading paper in the stand/3 x 500 sheet paper drawer
- Specifications (stand/3 x 500 sheet paper drawer)
- Loading paper in the stand/MPD & 2000 sheet paper drawer
- Specifications (stand/MPD & 2000 sheet paper drawer)
- SYSTEM SETTINGS
- REPLACING THE TONER CARTRIDGE
- STORAGE OF SUPPLIES
- MISFEED REMOVAL
- REMOVING AN ORIGINAL MISFEED
- TROUBLESHOOTING
- LOADING PAPER
- CHAPTER 3
- DUPLEX MODULE
- MAIL-BIN STACKER
- FINISHER
- SADDLE STITCH FINISHER
- SHARP OSA
- APPLICATION COMMUNICATION MODULE (MX-AMX2)
- EXTERNAL ACCOUNT MODULE (MX-AMX3)
- Part 2: Copier Operation
- CHAPTER 4
- AUTOMATIC DOCUMENT FEEDER
- PLACING ORIGINALS
- CHECKING THE SIZE OF A PLACED ORIGINAL
- STORING, DELETING, AND USING ORIGINAL SIZES
- NORMAL COPYING
- ADJUSTING THE EXPOSURE
- REDUCTION/ENLARGEMENT/ZOOM
- SPECIAL PAPERS
- CHAPTER 5
- SPECIAL MODES
- General procedure for using special functions
- Margin shift
- Erase
- Dual page copy
- Pamphlet copy
- Job build
- Tandem copy
- Covers/inserts
- About the explanations of covers and inserts
- Preparations for using covers and inserts
- Procedure for inserting front and back cover paper
- Procedure for adding inserts
- Checking, editing, and deleting cover/insert pages
- Examples of covers and inserts
- Symbols used for covers and inserts
- Covers (One-sided copying of one-sided originals)
- Covers (Two-sided copying of one-sided originals)
- Covers (One-sided copying of Two-sided originals)
- Covers (Two-sided copying of two-sided originals)
- Inserts (One-sided copying of one-sided originals)
- Inserts (One-sided copying of two-sided originals)
- Transparency film with insert sheets
- Multi shot
- Book copy
- Card shot
- Mirror image
- B/W reverse
- Print menu
- Common operation procedure for using the print menu
- Printing in combination with other special functions
- Printing the date on copies
- Printing a stamp (reverse text) on copies
- Printing the page number on copies
- Examples of page number printing
- Printing entered text on copies
- Storing text sequences
- Editing and deleting stored text
- Checking and changing the print layout
- STORING, USING AND DELETING JOB PROGRAMS
- INTERRUPTING A COPY RUN
- SPECIAL MODES
- CHAPTER 6
- CHAPTER 7
- CHAPTER 8
LOADING PAPER
2-4
■ Applicable plain paper
For satisfactory results, plain paper must conform to the following requirements.
■ Applicable special paper
For satisfactory results, special paper must conform to the following requirements.
■ Paper that can be used for automatic two-sided printing
Paper used for automatic two-sided printing (paper that can be fed through the duplex module) must meet the
following conditions:
Paper type :Plain paper as specified above.
Paper size :Must be one of the following standard sizes: A3, B4, A4, A4R, B5, B5R or A5R (11" x 17", 8-1/2"
x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R or 5-1/2" x 8-1/2"R)
Paper weight :64 to 105
g/m
2
(16 to 28 lbs.)
Paper in AB system Paper in inch system
A5 to A3 5-1/2
"
x 8-1/2
"
to 11
"
x17
"
Plain paper 60 to 105 g/m
2
or 16 to 28 lbs.
Recycled, coloured, pre-punched, pre-printed and letterhead papers must conform to the same conditions as above.
Typ e Re mar ks
Special paper Thick paper ●
For A5 to A4 or 5-1/2
"
x 8-1/2
"
to 8-1/2
"
x 11
"
sizes, thick paper ranging
from 60 to 128
g/
m
2
or 16 to 34 lbs. can be used.
●
For sizes larger than A4 or 8-1/2
"
x 11
"
, thick paper ranging from 60 to
105
g/
m
2
or 16 to 28 lbs. can be used.
●
Other thick papers Index stock (176
g/
m
2
or 65 lbs.) can be used.
Cover stock (200 to 205
g/
m
2
or 110 lbs.) can be used but only for A4,
8-1/2" x 11" paper in the portrait orientation.
●
For A5 or 5-1/2
"
x 8-1/2
"
paper, the orientation must be landscape.
Transparency film, labels,
and tracing paper
●
Use SHARP recommended paper. Do not use labels other than SHARP
recommended labels. Doing so may leave adhesive residue in the
machine, causing paper misfeeds, smudges on prints or other machine
trouble.
Postcards ●
Japanese official postcards can be used.
Envelopes ●
Applicable standard envelopes: COM-10, Monarch, DL, C5, ISO B5,
CHOKEI 3
● Envelopes can only be fed from the tray 2.
Applicable paper stock weight for envelopes is 75 to 90
g/
m
2
or 20 to 23 lbs..
NOTES
● Special papers (explained above) cannot be used for automatic two-sided printing.
● Various types of plain paper and special paper are sold. Some of these cannot be used in the machine. Please
consult your retailer or your dealer when buying paper.
● The image quality and toner fusibility of special papers may change due to ambient conditions, operating
conditions, and paper characteristics, resulting in image quality inferior to that of SHARP standard paper.