MX-M350U/N/M450U/N Operation-Manual Copier GB
Table Of Contents
- Part 1: General Information
- PRODUCT CONFIGURATIONS
- OPERATION MANUALS
- INSTALLATION REQUIREMENTS
- CAUTIONS
- CONTENTS
- CHAPTER 1
- CHAPTER 2
- LOADING PAPER
- Loading paper in paper tray 1
- Changing the paper size in paper tray 1
- Specifications of paper trays
- Setting the paper type and paper size
- Setting the paper size when a special size is loaded
- Programming and editing paper types
- Loading paper in the multi purpose drawer
- Specifications (multi purpose drawer)
- Loading paper in the stand/3 x 500 sheet paper drawer
- Specifications (stand/3 x 500 sheet paper drawer)
- Loading paper in the stand/MPD & 2000 sheet paper drawer
- Specifications (stand/MPD & 2000 sheet paper drawer)
- SYSTEM SETTINGS
- REPLACING THE TONER CARTRIDGE
- STORAGE OF SUPPLIES
- MISFEED REMOVAL
- REMOVING AN ORIGINAL MISFEED
- TROUBLESHOOTING
- LOADING PAPER
- CHAPTER 3
- DUPLEX MODULE
- MAIL-BIN STACKER
- FINISHER
- SADDLE STITCH FINISHER
- SHARP OSA
- APPLICATION COMMUNICATION MODULE (MX-AMX2)
- EXTERNAL ACCOUNT MODULE (MX-AMX3)
- Part 2: Copier Operation
- CHAPTER 4
- AUTOMATIC DOCUMENT FEEDER
- PLACING ORIGINALS
- CHECKING THE SIZE OF A PLACED ORIGINAL
- STORING, DELETING, AND USING ORIGINAL SIZES
- NORMAL COPYING
- ADJUSTING THE EXPOSURE
- REDUCTION/ENLARGEMENT/ZOOM
- SPECIAL PAPERS
- CHAPTER 5
- SPECIAL MODES
- General procedure for using special functions
- Margin shift
- Erase
- Dual page copy
- Pamphlet copy
- Job build
- Tandem copy
- Covers/inserts
- About the explanations of covers and inserts
- Preparations for using covers and inserts
- Procedure for inserting front and back cover paper
- Procedure for adding inserts
- Checking, editing, and deleting cover/insert pages
- Examples of covers and inserts
- Symbols used for covers and inserts
- Covers (One-sided copying of one-sided originals)
- Covers (Two-sided copying of one-sided originals)
- Covers (One-sided copying of Two-sided originals)
- Covers (Two-sided copying of two-sided originals)
- Inserts (One-sided copying of one-sided originals)
- Inserts (One-sided copying of two-sided originals)
- Transparency film with insert sheets
- Multi shot
- Book copy
- Card shot
- Mirror image
- B/W reverse
- Print menu
- Common operation procedure for using the print menu
- Printing in combination with other special functions
- Printing the date on copies
- Printing a stamp (reverse text) on copies
- Printing the page number on copies
- Examples of page number printing
- Printing entered text on copies
- Storing text sequences
- Editing and deleting stored text
- Checking and changing the print layout
- STORING, USING AND DELETING JOB PROGRAMS
- INTERRUPTING A COPY RUN
- SPECIAL MODES
- CHAPTER 6
- CHAPTER 7
- CHAPTER 8
LOADING PAPER
2-3
2
Specifications of paper trays
The specifications for types and sizes of paper that can be used in each tray are shown below.
Tray Tray No.
(tray name)
Applicable paper types Applicable paper sizes Paper
weight
Paper tray 1 Tray 1 Plain paper (Refer to the next page
for applicable plain papers.)
●
A4, B5, 8-1/2
"
x 11
"
60 to 105
g
/m
2
or 16 to 28 lbs.
Multi purpose
drawer
/bypass tray
Tray 2
/bypass
tray
Plain paper (Refer to the next page
for applicable plain papers.)
● If "AUTO-AB" is selected in setting the
paper type and paper size (page 2-5),
the following paper sizes can be used
with the automatic detection function:
A3, B4, A4, A4R, B5, B5R, A5R, 8-1/2 x 13"
●
If "AUTO-INCH" is selected in setting the
paper type and paper size (page
2-5
),
the following paper sizes can be used
with the automatic detection function:
11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2"
x 11"R, 7-1/4" x 10-1/2", 5-1/2" x 8-1/2"R
●
Non-standard sizes
60 to 128
g
/m
2
or 16 to 34 lbs.
Special paper
(Refer to the
next page for
applicable
special
papers.)
●
Thick paper
●
Labels,
transparency film
●
If "AUTO-AB" is selected in setting the
paper type and paper size (page
2-5
), the
following paper sizes can be used with the
automatic detection function:
A4, A4R, B5, B5R
●
If "AUTO-INCH" is selected in setting the
paper type and paper size (page
2-5
), the
following paper sizes can be used with the
automatic detection function:
8-1/2" x 11", 8-1/2" x 11"R
●
Non-standard sizes
See the
remarks for
special
paper on the
next page.
Postcard ●
Japanese official postcard
Envelopes can only
be fed from the
multi-purpose drawer.
Applicable stock
weight for envelopes
is 75 to 90 g/m
2
or 20
to 23 lbs.
●
Applicable standard size envelopes:
COM-10, Monarch, DL, C5, ISO B5
CHOKEI 3
●
Non-standard size
Stand
/3 x500 sheet
paper drawer
Upper Tray 2 Same as multi purpose drawer
Middle Tray 3 Plain paper (Refer to the next page
for applicable plain papers.)
● If "AUTO-AB" is selected in setting the
paper type and paper size (page 2-5),
the following paper sizes can be used
with the automatic detection function:
A3, B4, A4, A4R, B5, B5R, 8-1/2" x 13"
●
If "AUTO-INCH" is selected in setting the
paper type and paper size (page
2-5
),
the following paper sizes can be used
with the automatic detection function:
11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2"
x 11"R, 7-1/4" x 10-1/2"R
60 to 105
g
/m
2
or 16 to 28 lbs.
Lower Tray 4
Stand
/MPD & 2000
sheet paper
drawer
Upper Tray 2 Same as multi purpose drawer
Lower Tray 3 Plain paper (Refer to the next page
for applicable plain papers.)
●
A4, 8-1/2" x 11"
60 to 105
g
/m
2
or 16 to 28 lbs.