MX-M350U/N/M450U/N Operation-Manual Copier GB
Table Of Contents
- Part 1: General Information
- PRODUCT CONFIGURATIONS
- OPERATION MANUALS
- INSTALLATION REQUIREMENTS
- CAUTIONS
- CONTENTS
- CHAPTER 1
- CHAPTER 2
- LOADING PAPER
- Loading paper in paper tray 1
- Changing the paper size in paper tray 1
- Specifications of paper trays
- Setting the paper type and paper size
- Setting the paper size when a special size is loaded
- Programming and editing paper types
- Loading paper in the multi purpose drawer
- Specifications (multi purpose drawer)
- Loading paper in the stand/3 x 500 sheet paper drawer
- Specifications (stand/3 x 500 sheet paper drawer)
- Loading paper in the stand/MPD & 2000 sheet paper drawer
- Specifications (stand/MPD & 2000 sheet paper drawer)
- SYSTEM SETTINGS
- REPLACING THE TONER CARTRIDGE
- STORAGE OF SUPPLIES
- MISFEED REMOVAL
- REMOVING AN ORIGINAL MISFEED
- TROUBLESHOOTING
- LOADING PAPER
- CHAPTER 3
- DUPLEX MODULE
- MAIL-BIN STACKER
- FINISHER
- SADDLE STITCH FINISHER
- SHARP OSA
- APPLICATION COMMUNICATION MODULE (MX-AMX2)
- EXTERNAL ACCOUNT MODULE (MX-AMX3)
- Part 2: Copier Operation
- CHAPTER 4
- AUTOMATIC DOCUMENT FEEDER
- PLACING ORIGINALS
- CHECKING THE SIZE OF A PLACED ORIGINAL
- STORING, DELETING, AND USING ORIGINAL SIZES
- NORMAL COPYING
- ADJUSTING THE EXPOSURE
- REDUCTION/ENLARGEMENT/ZOOM
- SPECIAL PAPERS
- CHAPTER 5
- SPECIAL MODES
- General procedure for using special functions
- Margin shift
- Erase
- Dual page copy
- Pamphlet copy
- Job build
- Tandem copy
- Covers/inserts
- About the explanations of covers and inserts
- Preparations for using covers and inserts
- Procedure for inserting front and back cover paper
- Procedure for adding inserts
- Checking, editing, and deleting cover/insert pages
- Examples of covers and inserts
- Symbols used for covers and inserts
- Covers (One-sided copying of one-sided originals)
- Covers (Two-sided copying of one-sided originals)
- Covers (One-sided copying of Two-sided originals)
- Covers (Two-sided copying of two-sided originals)
- Inserts (One-sided copying of one-sided originals)
- Inserts (One-sided copying of two-sided originals)
- Transparency film with insert sheets
- Multi shot
- Book copy
- Card shot
- Mirror image
- B/W reverse
- Print menu
- Common operation procedure for using the print menu
- Printing in combination with other special functions
- Printing the date on copies
- Printing a stamp (reverse text) on copies
- Printing the page number on copies
- Examples of page number printing
- Printing entered text on copies
- Storing text sequences
- Editing and deleting stored text
- Checking and changing the print layout
- STORING, USING AND DELETING JOB PROGRAMS
- INTERRUPTING A COPY RUN
- SPECIAL MODES
- CHAPTER 6
- CHAPTER 7
- CHAPTER 8
8-2
SPECIFICATIONS
Automatic document feeder
* Maximum of 15 sheets when originals are heavier than 105 g/m
2
(28 lbs.
)
. If the number of placed sheets exceeds
this, scanning of the originals will not take place correctly and an extended image may result.
Type Console
Print system Electrophotographic system
Photoconductive type OPC drum
Developer system Dry-type two-component magnetic brush development
Fusing system Heater roller
Resolution Scan: 600 x 600 dpi, output: 600 x 600 dpi
Gradation 256 levels
Originals Sheets, bound documents
Maximum size: A3 or 11" x 17"
Copy paper Plain paper and special papers
Copy sizes Max. A3 or 11" x 17", min. A5R or 5-1/2" x 8-1/2"R, Postcard
Image loss: Max 8 mm or 21/64" (leading edge and trailing edge in total),
max. 8 mm or 21/64" (along all other edges in total)
Warm-up time 80 seconds or less
First-copy time
MX-M350N/MX-M350U: 4.9 seconds or less*
MX-M450N/MX-M450U: 4.4 seconds or less*
* Conditions: The document glass is used and A4 size paper is fed horizontally from
the machine tray (tray 1).
Copy ratio Variable: 25 to 400% in 1% increments, total 376 steps
Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%
and 400% for AB system, 25%, 50%, 64%, 77%, 100%, 121%, 129%, 200% and
400% for inch system.
Continuous copy 999 copies
Dimensions
840 mm (W) x 665 mm (D) x 1127 mm (H)
(33-1/16" (W) x 26-11/64" (D) x 44-23/64" (H))
(including automatic document feeder)
Weight Approx. 109.3 kg (Approx. 241.0 lbs.)
(when the duplex module/bypass tray is installed)
Overall dimensions 1031 mm (W) x 665 mm (D) (40-37/64" (W) x 26-11/64"(D))
(when the duplex module/bypass tray is installed)
Required power supply For power supply requirements, see the name plate located on the back of the
main unit.
Operating conditions Temperature: 10°C to 30°C (50°F to 86°F)
Humidity: 20% to 85%
Name B/W scanner module/DSPF
Original size A3 to A5 (11" x 17" to 5-1/2" x 8-1/2")
Weight of originals 50 to 128 g/m
2
(14 to 34 lbs.)
Number of originals Maximum 50 sheets (maximum 30 A3 or B4 (11" x 17" or 8-1/2" x 14") size
sheets*), stack height must not exceed the heights indicated below.
50 to 80 g/m
2
(14 to 21 lbs.): 6.5 mm (17/64") or less
80 to 128 g/m
2
(21 to 34 lbs.): 5 mm (13/64") or less
Power supply Supplied from machine
Dimensions
824 mm (W) x 648 mm (D) x 190 mm (H) (32-7/16" (W) x 25-33/64" (D) x 7-31/64" (H))
Weight Approx.
21.2 k
g
(46.8 lbs.)
Some discrepancies may exist in the illustrations and content due to improvements to the machine.