MX-M350U/N/M450U/N Operation-Manual Copier GB

CALLING UP AND USING A FILE
7-21
7
(11) [SEND SETTINGS] key
[SEND SETTINGS] key is displayed in scanner
mode and Internet FAX mode.
Touch this key to set the subject and file name. In
scanner mode, the sender name can also be set.
(12) [SUB ADDRESS] key or [ADDRESS ENTRY] key
● Touch this key to directly enter the destination for
a Scan to E-mail, Scan to FTP, Scan to Network
Folder or Internet fax transmission.
● Touch this key to enter the sub-address and
passcode for an F-code fax transmission.
■ [Property change]
Select this operation to change the attribute of a saved file. Three attributes are available: [SHARING],
[PROTECT], and [ CONFIDENTIAL].
The following screen appears when the [PROPERTY CHANGE] key is selected in the operation selection screen.
Note the restrictions below on changing the attribute.
[Restrictions on changing the attribute]
●A file that is set to [SHARING] can be
changed to [PROTECT] or [CONFIDENTIAL].
However, a [SHARING] file that is saved in the
Quick File folder can only be changed to
[PROTECT].
●A file that is set to [PROTECT] can be
changed to [SHARING] or [CONFIDENTIAL].
However, a [PROTECT] file that is saved in
the Quick File folder can only be changed to
[SHARING].
●A file that is saved in the Quick File folder
cannot be changed to [CONFIDENTIAL].
1
Touch the [PROPERTY CHANGE] key in
the operation selection screen.
2
Touch the key of the desired attribute.
If you are changing a
[SHARING] or
[PROTECT] file to
[CONFIDENTIAL],
touch the [PASSWORD]
key and enter the
password.
3
Touch the [OK] key.
NOTE
See the "Operation manual (for facsimile)" and "Operation manual (for image send)" for detailed explanations of
(1), (2), (3), (4), (5), (6), (7), (8), (9), (11), and (12).
JOB SETTINGS / PROPERTY CHANGE
Basic specifications Yamada Taro A4
CANCEL OK
SHARING
CONFIDENTIAL
PROTECT
PASSWORD
PROPERTY
CHANGE
DETAIL
SHARING
CONFIDENTIAL
PROTECT
PASSWORD
OK
NCEL