N Operation-Manual Copier GB

Table Of Contents

1-2

INTRODUCTION

Thank you for purchasing a SHARP digital multifunction copier.

Please read this manual before using the machine. In particular, be sure to read "INSTALLATION REQUIREMENTS"

before using the machine.

Please keep this manual close at hand for reference whenever necessary.

This manual provides general information on using the machine, such as routine maintenance and how to load paper

and remove misfeeds. It also explains how to use the copier and document filing functions.

Separate manuals have been provided for the fax function, printer function, and network scanner function.

■ Original and paper sizes

This machine allows use of standard sizes in both the AB and inch systems.

These are shown in the tables below.

■ The meaning of "R" in original and paper size indications

Some original and paper sizes can be placed in either the portrait or landscape orientations. To differentiate

between landscape and portrait, the landscape orientation size indication will contain an "R". These are indicated

as A4R, B5R, 8-1/2" x 11"R, 5-1/2" x 8-1/2"R, etc. Sizes that can be placed only in the landscape orientation (A3,

B4, 11" x 17", 8-1/2" x 14", 8-1/2" x 13") do not contain the "R" in their size indication.

Sizes in the AB system Sizes in the inch system

A3 11" x 17" (LEDGER)

B4 8-1/2" x 14" (LEGAL)

A4 8-1/2" x 13" (FOOLSCAP)

B5 8-1/2" x 11" (LETTER)

A5 7-1/4" x 10-1/2" (EXECUTIVE)

5-1/2" x 8-1/2" (INVOICE)

Size indication

with "R"

Landscape

orientation

Size indication

without "R"

Portrait orientation