MX-M283N/M363N/M453N/M503N Operation-Manual Safety-Guide GB

18
SPECIFICATIONS
Punch module specifications (for saddle stitch finisher)
Keyboard specifications
Printer specifications
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 When the XPS expansion kit is installed.
*3 Barcode font kit is required.
*4 Supported operating systems are Windows 2000 / XP / Vista / Server 2008.
*5 To install the XPS expansion kit, an expansion memory board is required.
Model
MX-PNX5A MX-PNX5B MX-PNX5C MX-PNX5D
Hole punching
2 holes 2 holes or 3 holes 4 holes 4 holes, broad width
Allowed paper sizes for
punching
A3, B4, A4, A4R, B5,
B5R, 11" x 17",
8-1/2" x 14",
8-1/2" x 13-1/2",
8-1/2" x 13-2/5",
8-1/2" x 13",
8-1/2" x 11",
8-1/2" x 11"R,
7-1/4" x 10-1/2", 8K,
16K, 16KR
2 holes:
8-1/2" x 14",
8-1/2" x 13-1/2",
8-1/2" x 13-2/5",
8-1/2" x 13",
8-1/2" x 11"R,
7-1/4" x 10-1/2"
3 holes:
11" x 17", 8-1/2" x 11",
A3, A4
A3, A4 A3, B4, A4, A4R, B5,
B5R, 11" x 17",
8-1/2" x 14",
8-1/2" x 13-1/2",
8-1/2" x 13-2/5",
8-1/2" x 13",
8-1/2" x 11",
8-1/2" x 11"R,
7-1/4" x 10-1/2"
Punchable paper weights
56 g/m
2
to 128 g/m
2
(15 lbs. to 32 lbs.)
Power supply
Supplied from saddle stitch finisher
Dimensions
122 mm (W) x 604 mm (D) x 248 mm (H) (4-13/16" (W) x 23-25/32" (D) x 9-49/64" (H))
Weight
Approx. 3.5 kg (7.7 lbs.)
Note:
Special media such as transparency film and label sheets cannot be stapled or punched.
Model
MX-KBX2
Power supply
Supplied from the machine
Type
Built-in
Continuous printing speed
Same as continuous copying speed (When printing same document continuously on A4
(8-1/2" x 11") plain paper in non-offset mode, excluding processing time.)
Printing resolution
600 x 600 dpi / 1200 x 1200 dpi
Printer driver type
PCL5e, PCL6, PostScript 3 compatible*
1
, XPS*
2
Supported protocols
TCP/IP, IPX/SPX, NetBEUI, EtherTalk*
1
Supported client PC
operating systems
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide / Sharpdesk Installation
Guide.
Fonts
PCL5e, PCL6 80 European fonts, 28 barcode fonts*
3
, 1 bitmap font
PostScript 3 compatible*
1
136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)*
4
Memory
Standard system memory: 1 GB
Expansion memory: 1 GB*
5
Print area
Entire page excluding margin of 4.2 mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.