Operation Manual, MX-M266N-M316N ,GB

1-56
BEFORE USING THE MACHINE
Contents
Caution
Do not throw a toner cartridge into a fire. Toner may fly and cause burns.
Store toner cartridges out of the reach of small children.
If a toner cartridge is stored on end, the toner may harden and become unusable. Always store toner cartridges on their
side.
If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality
and performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.
Keep the used toner cartridge in a plastic bag (do not discard it). Your service technician will collect the used toner
cartridge.
To view the approximate amount of toner remaining, continually touch the [COPY] key during printing or when the machine
is idle. The percentage of toner remaining will appear in the display while the key is touched.
When the toner cartridge provided with the machine is installed, the percentage of toner remaining displayed from the
beginning is "50-25%".
Depending on your conditions of use, the colour may become faint or the image blurred.
When copying continuously for a long time, or when copying a document with large areas of black, the machine may
display the message "Toner replenishment in progress." and pause the copy job, even though there is still toner left. In
such a case, the machine will replenish the toner for approximately three minutes, and will resume copying once the toner
is replenished.