Operation Manual, MX-M266N-M316N ,GB

7-43
SYSTEM SETTINGS
Contents
Enable/Disable Settings
Item Factory default setting Page
■ Enable/Disable Settings
7-93
● Printer Condition Settings 7-93
 (When the hard disk drive is installed. (For U model, when the
hard disk drive and the pirnter expansion kit are installed.))
Disabled
7-93
● User Control 7-93
 Disabling of Printing by Invalid User Disabled 7-93
● Operation Settings 7-93
 Cancel Auto Clear Timer Disabled 7-93
 Disabling of Job Priority Operation Disabled 7-93
 Disabling of Bypass Printing Disabled 7-93
 Disable Auto Key Repeat Disabled 7-93
 Disabling of Clock Adjustment Disabled 7-93
 Disabling of Covers/Inserts Mode*
1
Disabled 7-93
● Device Control 7-93
 Disabling of Document Feeder*
1
Disabled 7-93
 Disabling of Duplex Disabled 7-93
 Disabling of Optional Paper Drawer*
2
Disabled 7-93
 Disabling of Tray Setting Disabled 7-93
 Disabling of Finisher*
3
Disabled 7-93
 Disabling of Offset Disabled 7-93
 Disabling of Stapler*
3
Disabled 7-93
 Disabling of Master Machine Mode Disabled 7-94
 Disabling of Slave Machine Mode Disabled 7-94
● Copy Function Settings 7-94
 Disabling Deletion of Job Programs Disabled 7-94
 Disabling of Bypass-Tray in Duplex Copy Disabled 7-94
 Disabling of Auto Paper Selection Disabled 7-94
● Printer Settings 7-94
 Prohibit Notice Page Printing Enabled 7-94
 Prohibit Test Page Printing Disabled 7-94
 Exclude Bypass-Tray from Auto Paper Select Disabled 7-94
 Disabling of USB Memory Direct Print*
4
Disabled 7-94