Operation Manual, MX-M266N-M316N ,GB

7-35
SYSTEM SETTINGS
Contents
* When the automatic document feeder is installed.
Network Settings
* Depending on your machine specifications, only the items under "General Setting" will be displayed.
 Disabling Deletion of Job Programs Disabled 7-73
 Disabling of Bypass-Tray in Duplex Copy Disabled 7-73
 Disabling of Auto Paper Selection Disabled 7-73
 Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-73
 600dpi x 600dpi Scanning Mode for Document Feeder* Disabled 7-73
 Quick Scan from Document Glass Enabled 7-73
 Auto Clear Before Copy Job Execution Disabled 7-73
Item Factory default setting Page
■ Network Settings
7-74
● General Setting* DHCP 7-74
 IPv6 Settings Disabled 7-74
 Enable TCP/IP Enabled 7-74
 Enable NetWare Disabled 7-74
 Enable EtherTalk Disabled 7-74
 Enable NetBIOS Disabled 7-74
 Reset the NIC – 7-74
 Ping Command – 7-74
● Connection Type Switching* – 7-75
● Wireless Settings* – 7-75
Item Factory default setting Page