Operation Manual, MX-M266N-M316N ,GB

7-34
SYSTEM SETTINGS
Contents
*1 When the hard disk drive is installed.
*2 When the automatic document feeder is installed.
*3 When a paper tray is installed.
*4 When a finisher is installed.
Copy Function Settings
 Disabling of Duplex Disabled 7-70
 Disabling of Optional Paper Drawer*
3
Disabled 7-70
 Disabling of Tray Settings Disabled 7-70
 Disabling of Finisher*
4
Disabled 7-70
 Disabling of Offset Disabled 7-70
 Disabling of Stapler*
4
Disabled 7-70
● Fusing Control Settings 60 - 89g/m
2
(16 - 23 lbs.) 7-70
Item Factory default setting Page
■ Copy Function Settings
7-71
● Initial Status Settings
7-71
 Colour Mode Full Colour
 Paper Tray Varies depending on the machine
configuration
 Exposure Type Auto
 Copy Ratio 100%
 2-Sided Copy 1-Side to 1-Side
 Output –
● Other Settings 7-72
 Copy Exposure Adjustment 7-72
 Rotation Copy Setting Enabled 7-72
 Add or Change Extra Preset Ratios – 7-72
 Setting a Maximum Number of Copies 999 7-72
 Initial Margin Shift Setting
7-72 Side 1 10 mm (1/2")
 Side 2 10 mm (1/2")
 Erase Width Adjustment
7-72 Edge Clearance Width 10 mm (1/2")
 Centre Clearance Width 10 mm (1/2")
 Card Shot Settings
7-72 Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
 Fit to Page Disabled
 Initial Tab Copy Setting 10 mm (1/2") 7-72
Item Factory default setting Page