Operation Manual, MX-M266N-M316N ,GB

7-33
SYSTEM SETTINGS
Contents
*1 This cannot be set on the machine. Set this in the system settings in the Web pages.
*2 When the Internet fax expansion kit is installed.
*3 When the facsimile expansion kit is installed.
*4 When the application integration module is installed.
*5 When the hard disk expansion kit is installed.
Device Control
● Remote Operation Settings
7-67
 Remote Software Operation
 Operational Authority Prohibited
 View Password Entry Screen Display in Both PC and MFP
 Operation from Specified PC
 Operational Authority Prohibited
 Hostname or IP Address of PC –
 View Password Entry Screen Display in Both PC and MFP
 Operation by User who Has Password
 Operational Authority Prohibited
 View Password Entry Screen Display in Both PC and MFP
● Soft Keyboard Template Setting – 7-67
Item Factory default setting Page
■ Device Control
7-68
● Other Settings 7-68
 Original Feeding Mode All Disabled 7-68
 Auto Paper Selection Setting Plain Paper 7-68
 Tandem Connection Setting
7-68
 IP Address of Slave Machine 0.0.0.0
 Port Number 50001
 Disabling of Master Machine Mode Disabled
 Disabling of Slave Machine Mode Disabled
 Detect Standard in Auto Colour Mode 3 7-68
 Status Indicator Setting Pattern 1 7-68
 Optimization of a Hard Disk*
1
– 7-68
 Clear All Job Log Data*
1
– 7-68
● Original Size Detector Setting
7-69 Original Detection Size Combination Varies depending on country and region
 Cancel Detection at Document Glass Disabled
● Disabling of Devices 7-70
 Disabling of Document Feeder*
2
Disabled 7-70
Item Factory default setting Page