Operation Manual, MX-M266N-M316N ,GB

7-30
SYSTEM SETTINGS
Contents
System Settings (Administrator) List
The system settings that appear following administrator login are shown below. The default setting for each item is also shown.
User Control
*1 This cannot be set on the machine. Set this in "User Control" in the Web pages.
*2 When the HID card reader is available.
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
• For information on the general settings, see "System Settings (General) List" (page 7-6).
• For explanations of settings related to the fax function, see "SYSTEM SETTINGS FOR FAX" (page 7-100).
Item Factory default setting Page
■ User Control
7-46
● User Authentication Setting 7-46
 User Authentication Disabled 7-46
 Authentication Method Setting Authenticate a User by Login Name
and Password
7-46
 Device Account Mode Setting Disabled 7-46
● Other Settings 7-47
 Actions when the Limit of Pages for Output Jobs Job is Completed even when the Limit
of Pages is Reached
7-47
 The Number of User Name Displayed Setting 12 7-47
 A Warning when Login Fails Disabled 7-47
 Disabling of Printing by Invalid User Disabled 7-47
 Automatically print stored jobs after login Disabled 7-47
 Default Network Authentication Server Setting – 7-47
 Perform LDAP server access control. Disabled 7-48
 Display Usage Status after Login – 7-49
 User Information Print – 7-49
● User List – 7-50
● Page Limit Group List – 7-52
● Authority Group List – 7-53
● Favourite Operation Group List*
1
– 7-56
 Favourite Operation Group Registration*
1
– 7-56
 My Menu List*
1
– 7-57
● User Count – 7-58
● Card area settings – 7-59
● Card type/Reader settings – 7-59
● Card Setting*
2
– 7-59
 Card Reader Device Registration – 7-59