Operation Manual, MX-M266N-M316N ,GB

1-8
BEFORE USING THE MACHINE
Contents
(8) [CLEAR] key ( )
Press this key to return the number of copies to "0".
(9) [STOP] key ( )
Press this key to stop a copy job or scanning of an
original.
(10) Main power indicator
This lights up when the machine's main power switch is
in the "on" position.
☞ TURNING THE POWER ON AND OFF (page 1-14)
(11) [POWER] key ( )
Use this key to turn the machine power on and off.
☞ TURNING THE POWER ON AND OFF (page 1-14)
(12) [POWER SAVE] key ( ) / indicator
Use this key to put the machine into auto power shut-off
mode to save energy.
The [POWER SAVE] key ( ) blinks when the machine
is in auto power shut-off mode.
☞ [POWER SAVE] KEY (page 1-15)
(13) [LOGOUT] key ( )
Press this key to log out after you have logged in and
used the machine. When using the fax function, this key
can also be pressed to send tone signals on a pulse dial
line.
☞ USER AUTHENTICATION (page 1-16)
(14) Data Notification indicator (Green) ( )
The indicator lights solidly or blinks to indicate the status
of a job.
☞ NOTIFICATION INDICATOR (page 1-13)
(15) [#/P] key ( )
When using the copy function, press this key to use a job
program. When using the fax function, this key can be
used when dialling.
(16) Error indicator ( )
Lights solidly or blinks to indicate the status of the error.
☞ NOTIFICATION INDICATOR (page 1-13)
(17) [CLEAR ALL] key ( )
Press this key to return to the initial operation state.
Use this key when you wish to cancel all settings that
have been selected and start operation from the initial
state.
(18) [START] key
Press this key to copy or scan an original. This key is also
used to send a fax in fax mode.
(8) (9) (10) (11) (12)
(13) (14) (15) (16) (17)
(18)
The indicators of the operation panel may differ depending on the country and region.