Operation Manual, User's Manual

7-109
SYSTEM SETTINGSSETTING MODE FOR FAX
The following lists the Setting mode for fax and factory default settings.
System Settings
U: General user; A: System administrator/Administrator
SETTING MODE FOR FAX
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Setup Items
Factory default setting
U A Page
System Settings
Image Send Settings
Fax Settings
Default Settings
Resolution Setting k No Yes
4-53- Apply the Resolution Set when Stored*
1
Disabled No Yes
+ (No item) Standard No Yes
Dial Mode Setting
*2
Tone No Yes
4-4
Auto Wake Up Print Enabled No Yes
Pause Time Setting 2 seconds No Yes 4-13
Fax Dest. Confirmation Mode Disabled No Yes 4-29
Speaker Settings No Yes
4-12
- Speaker Volume: 5 No Yes
- Ringer Volume Volume: 2 No Yes
- Line Monitor Volume: No Sound No Yes
- Fax Receive Complete Signal
Volume: 2; Tone Pattern: 3
Transmission Complete
Sound Time Setting: 3 sec.
No Yes
- Fax Send Complete Signal
Volume: 2; Tone Pattern: 3
Transmission Complete
Sound Time Setting: 3 sec.
No Yes
- Fax Communication Error Signal
Volume: 2; Tone Pattern: 3
Transmission Complete
Sound Time Setting:
Every 0.3 seconds
No Yes
Remote Reception Number Setting 5 No Yes 4-126
Original Print on Transaction Report
Print Out Error Report Only
No Yes 7-63
Transaction Report Print Select Setting No Yes
4-104- Single Sending
Print Out Error Report Only
No Yes
- Broadcasting Print Out All Report No Yes