Operation Manual, User's Manual

7-30
SYSTEM SETTINGS►SETTING MODE LIST
 Paper Type for Auto Paper Selection Plain 1: Enabled, Plain
2: Enabled, Recycled:
Disabled
No Yes 7-73
 Plain Paper Compatibility Settings Plain 1 No Yes 1-108
 Tandem Connection Setting No Yes
7-73
• IP Address of Client Machine 0.0.0.0 No Yes
• Port Number 50001 No Yes
• Tandem Mode No Yes
- Disabling of Master Machine Mode Disabled No Yes
- Disabling of Client Machine Mode Disabled No Yes
 Detect Standard in Auto Colour Mode 3 (Normal) No Yes
 Auto Switching of Finisher Trays*
9
Enabled No Yes
 Data Indicator Setting Pattern 1 No Yes
• Status Indicator will blink if data is received Enabled No Yes
• Error Light Setting Light & Blink No Yes
 Total Setting for Finish Specify Finishing
Position Based on
Paper Selected.
No Yes
 Plain Paper Weight Settings No Yes
• Paper Weight 60 to 89g/m
2
(16 to 23
lbs. )
No Yes
 Data List One Sided No Yes
 Disabling of Duplex Disabled No Yes
 Disabling of Offset Disabled No Yes
7-74
 Disabling of Document Feeder Disabled No Yes
 Disabling of Large Capacity Cassette
*4
Enabled No Yes
 Disabling of Optional Paper Drawer
*1
Disabled No Yes
 Disabling of Tray Settings Disabled No Yes
 Disabling of Finisher
*8
Disabled No Yes
 Disabling of Stapler
*8
Disabled No Yes
 Disabling of Punch
*10
Disabled No Yes
 Enable/Disable Settings
 User Control
• Disabling of Printing by Invalid User Disabled No Yes 1-55
 Copy Function Settings
• Disabling of Registration/Deletion of Program Disabled No Yes 2-128
• Disabling of Bypass-Tray in Duplex Copy Disabled No Yes 2-33
• Disabling of Auto Paper Selection Disabled No Yes 2-11
Setup Items Factory default setting U A Page