Operation Manual, User's Manual

7-28
SYSTEM SETTINGSSETTING MODE LIST
Display Confirmation Dialog when job is cancelled. Enabled No Yes
1-18
Switch the Number of Sets to be Displayed for Job
Status
Progress
No Yes
Alignment Order of 10-Key Ascending order from
upper left
No Yes
Setting Display from Main Unit No Yes
- Display Current Path Enabled No Yes
- Enable link of current path Enabled No Yes
MFP Display Pattern Setting Pattern 1 No Yes
Key Operation Setting No Yes
1-15
- Keys Touch Sound Middle No Yes
- Make Key Touch Sound at Default Setting Disabled No Yes
- Auto Clear Setting 60sec. No Yes
+Cancel Timer Disabled No Yes
- Key Operation Setting : Time for Accepting Key
Entry
0.0 seconds
No Yes
+ Disable Auto Key Repeat Disabled No Yes
- Time for Accepting Key Entry of Long Touch 0.5 seconds No Yes
- Double Tap Interval Setting 0.5 seconds No Yes
Disabling of Job Priority Operation Disabled No Yes
1-135
Disabling of Bypass Printing Disabled No Yes
Disabling of Covers/Inserts Mode Disabled No Yes 2-104
Disable Printing of Operation Manual from the
Operation Panel
Disabled
No Yes 1-106
Initial Original Count Setting All Invalid No Yes 1-126
Preview Setting
- Received Data Image Check Setting Disabled No Yes 4-61
- Default List/Thumbnail Display No Yes
1-21
+ Fax/I-Fax Reception Data
*5, *6
Thumbnail No Yes
+ File Retrieve of Main Folder/Quick File
Folder
*7
List
No Yes
+ File Retrieve of Custom Folder
*7
List No Yes
+ File Retrieve of Direct Print List No Yes
Remote Operation Settings No Yes
1-97
- Remote Software Operation No Yes
+ Operational Authority Prohibited No Yes
+ View Password Entry Screen Display in Both PC and
MFP
No Yes
Setup Items
Factory default setting
U A Page