Operation Manual, User's Manual

7-20
SYSTEM SETTINGS►SETTING MODE LIST
*1 When an internet fax expansion kit is installed.
*2 When a Hard disk expansion kit is installed. (MX-M2630/MX-M3050/MX-M3550/MX-M4050/MX-M5050/MX-M6050)
*3 This function is not available in some countries and regions.
•Direct SMTP Disabled No Yes
7-65• Add Hostname or IP Address. Disabled No Yes
• Hostname or IP Address – No Yes
 Receiving Date & Time Print Disabled No Yes
7-66
 Letter Size RX Reduce Print
*3
Disabled No Yes
 POP3 Communication Timeout 60sec. No Yes
 A3 RX Reduce
*3
Disabled No Yes
 Reception Check Interval Setting 5 Minute No Yes
• I-Fax Output Setting Varies depending on
the machine
configuration
No Yes
 Allow/Reject Mail or Domain Name Setting No Yes
7-67• Allow/Reject Mail or Domain Name Setting All Invalid No Yes
•Add New – No Yes
 Server Settings
 Receive Settings No Yes
7-67
• Internet Fax Receive Enabled No Yes
• POP3 Server – No Yes
• Port Number 110 No Yes
• POP Authentication Disabled No Yes
• User Name – No Yes
•Password – No Yes
- Change Password Disabled No Yes
• POP3 Communication Timeout 60sec. No Yes
• Reception Check Interval Setting 5 minutes No Yes
• Enable SSL Disable No Yes
 Default Settings
• I-Fax Own Name and Address Set No Yes
7-67- Set I-Fax Own Name – No Yes
-Own Address – No Yes
• Direct SMTP Setting No Yes
7-68
- Port Number (Receive) 25 No Yes
- Timeout 300 seconds No Yes
- Port Number (Send) 25 No Yes
- Timeout 300 seconds No Yes
Setup Items Factory default setting U A Page