Operation Manual, User's Manual
Table Of Contents
7-12
SYSTEM SETTINGS►SETTING MODE LIST
Printer Settings
U: General user; A: System administrator/Administrator
Setup Items
Factory default setting
U A Page
● Printer Settings
Condition Settings
Prohibit Notice Page Printing Enabled No Yes 3-3
Prohibit Test Page Printing Disabled No Yes 7-52
A4/Letter Size Auto Change Disabled No Yes
3-7
Bypass Tray Settings No Yes
• Enable Detected Paper Size in Bypass Tray Disabled No Yes
• Enable Selected Paper Type in Bypass Tray Disabled No Yes
• Exclude Bypass-Tray from Auto Paper Select Disabled No Yes
Job Spool Queuing Enabled No Yes 1-131
Disabling of USB Memory Direct Print Disabled No Yes 3-78
Disabling of Network Folder Direct Print Disabled No Yes 3-79
Disabling sending while printing Disabled No Yes 3-75
Interface Settings No Yes
7-54
Hexadecimal Dump Mode Disabled No Yes
I/O Timeout 60sec. No Yes
Enable Network Port Enabled No Yes
Network Port Emulation Switching Auto No Yes
Port Switching Method Switch at End of Job No Yes
Initial Status Settings Yes Yes
7-55
Copies 1 Yes Yes
Orientation Portrait Yes Yes
Paper Size A4 (8-1/2" x 11") Yes Yes
Output Tray Auto Yes Yes
Paper Type Plain Paper 1 Yes Yes
Resolution Setting 600dpi (High Quality) Yes Yes
Disable Blank Page Print Enabled Yes Yes
2-Sided Print 1-Sided Yes Yes
N-Up 1-Up Yes Yes
Fit To Page Enabled Yes Yes
Output
Varies depending on the
machine configuration
Yes Yes
• Print per Unit Enabled Yes Yes
• Separator Page Yes Yes
- Insert Before Job Disabled Yes Yes
- Insert After Job Disabled Yes Yes
•Staple Sort*
1
Disabled Yes Yes