Operation Manual, User's Manual

7-6
SYSTEM SETTINGS►SETTING MODE LIST
SETTING MODE LIST
The following is a list of setting mode items, factory default settings and restrictions for each item.
Status
U: General user; A: System administrator/Administrator
* Some settings can only be configured by the administrator.
Address Book
U: General user; A: System administrator/Administrator
*1 This setting is configured in setting mode on the web page.
*2 Set the Category Setting in System Settings→Image Send Settings→Common Settings→Category Setting of the machine's
setting mode.
SETTING MODE LIST
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
• Some setting items can only be configured on the Web page.
Setup Items Factory default setting U A Page
■ Status
● Machine Identification – Yes
*
Yes 7-50
● Total Count – Yes Yes 7-51
● Device Status – Yes Yes 7-51
● Network Status – Yes Yes 7-51
● Firmware Version – No Yes 7-52
● Power Reset – No Yes 7-52
● Data List – Yes Yes
7-52 List for User – Yes Yes
 List for Administrator – No Yes
Setup Items Factory default setting U A Page
■ Address Book
● Address Book*
1
– Yes Yes 1-141
● Category Setting*
2
– Yes Yes 1-158