Operation Manual, User's Manual
Table Of Contents
2-52
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Copy by specifying a repeat count (Fixed Repeat)
7
Tap the [Start] key to start copying.
1
Perform steps 1 to 3 in Copy by automatically calculating the repeat count
(Auto Repeat) (page 2-51).
2
Tap the [Fixed Repeat] key.
3
Tap the [Original] and [Paper Select] keys to select an original size and a
paper size, respectively.
► SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL (page 2-28)
► SELECTING THE PAPER TRAY FOR COPYING (page 2-11)
4
Tap [No. of Faces] to set a repeat
count.
After the settings are completed, tap .
The automatic calculation result is shown as the copy ratio.
If the calculated copy ratio exceeds the range from 25% to 400% (using document glass) or 25 to 200% (using automatic
document feeder), an error occurs.
5
Specify the repeat partition line.
After the settings are completed, tap and [Back] keys in sequence.
• To cancel the fixed repeat setting:
Tap the [Off] key.
• To cancel all settings:
Tap the [CA] key.
6
Tap the [Start] key to start copying.
A3
Preview
Back
Start
Repeat Layout
No. of Faces
Others
Exposure
Select Type/Exposure
Background Adjustment
Change Size/Direction.
Original
4 Repeat
2 Repeat
8 Repeat
16 Repeat
CA