MX-M182/D/M202D/M232D Operation-Manual GB

43
COPY FUNCTIONS
Copying from the document glass
1
Place the original for the front side of
the copy on the document glass, and
close the SPF/RSPF.
2
Press the [2-SIDED COPY] key.
The duplex mode selection
screen appears.
3
Select "1 to 2" with the [ ] or [ ] key,
or with the [2-SIDED COPY] key.
4
If you wish to have the orientation of
the image on the back of the copy
paper be opposite the orientation of
the image on the front, set "BINDING
CHANGE" to "ON" with the [ ] or [ ]
key.
5
Press the [OK] key.
You will return to the base
screen.
6
Make sure that the desired paper tray
is selected.
7
Set the number of copies and press
the [START] key ( ).
8
Remove the first original and then
place the original for the back side of
the copy on the document glass.
Close the SPF/RSPF and press the
[START] key ( ).
• The copy will be delivered to the centre tray.
• To cancel two-sided copying, press the [C] key.
• To cancel two-sided (duplex) copy mode, press the
[2-SIDED COPY] key to select "1 to 1" and then
press the [OK] key.
• When making two-sided copies of an odd number of
originals, touch the [READ-END] key ( ) after
scanning the last original.
DUPLEX SCAN
DUPLEX SCAN
2-SIDED COPY
T
OUTPUT
ORIGINAL SIZE
ORIGINAL SIZE
COPY MODE
1 to 1
1 to 2
2 to 2
PQ
ACC
LEX SCAN
LEX SCAN
ED COPY
COPY MODE
1 to 1
1 to 2
2 to 2
BINDING CHANGE OFF
COPY MODE
1 to 1
1 to 2
2 to 2
BINDING CHANGE ON
GHI
PQRS
BACK
OK
AN
PY
WXYZ
MNO
WXYZ
@.-
_
AD-END