MX-M182/D/M202D/M232D Operation-Manual GB
Table Of Contents
- CONTENTS
- INTRODUCTION
- USING THE MANUAL
- DIFFERENCES BETWEEN MODELS
- SETUP
- BEFORE USING THE MACHINE
- COPY FUNCTIONS
- PRINTER FUNCTIONS
- BASIC PRINTING
- PRINTER DRIVER SETTING SCREEN
- PRINTING MULTIPLE PAGES ON ONE PAGE
- FITTING THE PRINTED IMAGE TO THE PAPER (Fit To Paper Size)
- ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees)
- ENLARGING/REDUCING THE PRINT IMAGE (Zoom)
- PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black)
- ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE (Image Adjustment)
- PRINTING A WATERMARK
- TWO-SIDED PRINTING
- SAVING FREQUENTLY USED PRINT SETTINGS
- OUTLINE OF THE PRINT STATUS WINDOW
- SCANNER FUNCTIONS
- TROUBLESHOOTING
- ROUTINE MAINTENANCE
- APPENDIX
- SYSTEM SETTINGS GUIDE
104
8
Chapter 8
APPENDIX
Specifications, optional equipment, and supplies are explained in this chapter. To purchase optional equipment and
supplies, contact your authorised service representative.
SPECIFICATIONS (PRINTER AND
SCANNER)
PRINTER FUNCTION
Specifications
* Print speed during printing of the second sheet and following sheets when using A4 (8-1/2" x 11") plain paper and performing
continuous one-sided printing of the same page.
Print speed
*
MX-182/MX-M182D Max. 18 ppm
MX-M202D Max. 20 ppm
MX-M232D Max. 23 ppm
Resolution 600 dpi
Memory 128 MB
Emulation SHARP SPLC (Sharp Printer Language with Compression)
Interface connector USB connector (USB 2.0)
Interface cables
[USB cable]
Shielded twisted pair cable (max. length 3 m (10 feet), must support USB 2.0)
Please purchase a commercially available USB cable.