MX-M850/M950/M1100 Operation-Manual Maintenance-Guide GB

26
REMOVING MISFEEDS
14
Push the R3 lever down in the direction
of the arrow.
15
Move the R7 lever in the direction of the
arrow.
16
Remove the misfed paper.
When released, the R7 lever
automatically returns to its
original position.
After removing the paper, return
the R3 lever to its original
position.
17
Rotate the R9 knob in the direction of
the arrow.
18
Grasp the R10 lever (R8 lever on the
finisher) and pull out the unit.
Gently pull out the unit until it
stops.
19
Remove the misfed paper.
20
Open the R11 lever in the direction of
the arrow.
21
Remove the misfed paper.
After removing the paper, return
the R11 lever to its original
position.
If you are using the finisher (for the MX-M850), go to step 18.
Be sure to turn the R9 knob before performing step
18. If you perform step 18 without turning the knobs,
the paper may tear and pieces may remain in the
machine.
If you are using the finisher (for the MX-M850), go to step 24.